
Tree sizing
The tree in the photo was 7.5 feet in a room with 10-foot ceilings. Yours goes in a room with eight. Here is the math that saves you a sawed-off tip and a bent topper.

Measure from the floor to the ceiling where the tree will stand, not in the middle of the room — older houses sag. Then take off about 12 inches: roughly 4 for the stand and 6 to 8 for the topper and a little air above it. A tree that touches the ceiling looks crammed, not grand.
A full 7.5 ft tree is around 55 inches wide at the bottom. Leave at least a foot between the lowest branches and the wall, the sofa and the walkway to the room. If the corner is tight, a slim or pencil profile gives you the height without eating the room.
Pre-lit trees plug in at the base. Put the tree within reach of an outlet so the cord runs behind it, not across the floor where someone will catch it with a foot on Christmas morning.
Yes. The listed height is from the floor to the tip with the stand attached, before the topper.
Do not cut a pre-lit tree; the lights run through the top section. Bend the tip slightly and choose a flat or low topper instead.
Keep going